If you put them back on and the game starts working it will only be short term because these connectors will be burnt or the pins inside the connectors will be tarnished. LED 10 is a HALT LED meaning power up check has failed.įirst thing to do is take the plug with the 2 yellow and and 2 white wires off the power supply and little sub board it plugs into, check these connectors, if there are any brown marks on the connectors they need to be replaced.
This is because the voltage is below 4.8 at the board, if it drops below 4.7 you will see random interrupt errors depending which part of the self it is at when it fails. If anyone have any idea as to what could be wrong, i would very much appriciate your help.īlue Screen with white stripes should show and error on the screen Saying "backup ram access error" We opened both machines below the seats and noticed that on the broken machine LED 10 was on (red) and on the working machine a green LED was on we turn the machine off/on again, and the same screen appeared, but the error had gone.
We recently moved our daytona twin arcade machine, after doing so one of them no longer works.Īt first a blue screen appeared with white stripes, and an error message stating "interupt error.
0 kommentar(er)
